Type designation
Figure 3: Type designation (example)
1.
Type and size of actuator
2.
Flange size
Type and size
These instructions apply to the following devices types and sizes:
Part-turn actuators for open-close duty: SQ 05.2, 07.2, 10.2, 12.2, 14.2
Part-turn actuators for modulating duty: SQR 05.2, 07.2, 10.2, 12.2, 14.2
Order number
The product can be identified using this number and the technical data as well as
order-related data pertaining to the device can be compiled.
Please always state this number for any product inquiries.
On the Internet at http://www.auma.com, we offer a service allowing authorised
users to download order-related documents such as wiring diagrams and technical
data (both in German and English), inspection certificates and the operation
instructions when entering the order number.
Actuator serial number
Table 1: Description of serial number (with example)
NS12345
14
05
1
st
+ 2
nd
position: Assembly in week
Week 05
05
3
rd
+ 4
th
position: Year of manufacture
Year of manufacture: 2014
14
All other positions
Internal number for unambiguous product identification
NS12345
Data Matrix code
When registered as authorised user, you may use the AUMA Support App to scan
the Data Matrix code and directly access the order-related product documents without
having to enter order number of serial number.
Figure 4: Link to the App store:
2.2.
Short description
Part-turn actuator
Definition in compliance with EN ISO 5211:
A part-turn actuator is an actuator which transmits a torque to the valve for less than
one full revolution. It need not be capable of withstanding thrust.
AUMA part-turn actuators are driven by an electric motor. A handwheel is provided
for manual operation. Switching off in end positions may be either by limit or torque
seating. Controls are required to operate or process the actuator signals.
Actuators without controls can be equipped with AUMA actuator controls at a later
date. For more information, please state our order number (refer to actuator name
plate).
8
SQ 05.2 – SQ 14.2/SQR 05.2 – SQR 14.2
Identification
