manualshive.com logo in svg

AUMA A 25.2, Руководство по эксплуатации, Страница: 87 / 112

Поделиться
Скачать
AUMA A 25.2 Скачать руководство пользователя страница 87

12.2.2.

Disconnection from the mains with KT/KM electrical connection

Figure 96: KT/KM electrical connection

[1]

Cover

[2]

Screws for cover

[3]

O-ring

[4]

Screws (with gaskets) within connection frame

[5]

Connection frame

[6]

Grub screws within connection frame

Ignition of potentially explosive atmospheres caused by sparks.

Risk of death or serious injury.

→

Before opening the flameproof enclosure, ensure absence of gas and voltage.

→

Handle cover and housing parts with care.

→

Joint surfaces must not be damaged or soiled in any way.

→

Do not jam cover during fitting.

Removing the plug:

1.

Loosen the screws [2].

2.

Remove cover [1].

3.

For versions with terminal compartment in type of protection Ex d (flameproof
enclosure): Remove grub screws [6] inside the connection frame.

4.

Loosen screws [4] inside the connection frame.

5.

Remove electrical connection.

Fitting the plug/socket

connector:

6.

Clean sealing faces of plug/socket connector, cover and housing.

7.

Preserve joint surfaces with an acid-free corrosion protection agent.

8.

Check whether O-rings [3] are in good condition, replace if damaged.

9.

Apply a thin film of non-acidic grease (e.g. petroleum jelly) to the O-rings and
insert them correctly.

10. Fit electrical connection (connection frame) and fasten screws [4] (with gaskets)

evenly crosswise.

11. For versions with terminal compartment in Ex d (flameproof enclosure): Fasten

grub screws [6] (tightening torque approx. 10 Nm).

Information: The flameproof enclosure is only guaranteed provided the grub
screws are fastened [6].

87

SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1 
ACExC 01.2 

Servicing and maintenance

Содержание A 25.2

















































































































Отзывы:

Нет отзывов