AUMA A 25.2, Руководство по эксплуатации, Страница: 15 / 112

3. Transport and storage
3.1. Transport
For transport to place of installation, use sturdy packaging.
Hovering load!
Death or serious injury.
→
Do NOT stand below hovering load.
→
Attach ropes or hooks for the purpose of lifting by hoist only to housing and NOT
to handwheel.
→
Actuators mounted on valves: Attach ropes or hooks for the purpose of lifting
by hoist to valve and NOT to actuator.
→
Actuators mounted to gearboxes: Attach ropes or hooks for the purpose of lifting
by hoist only to the gearbox using eyebolts and NOT to the actuator.
→
Actuators mounted to controls: Attach ropes or hooks for the purpose of lifting
by hoist only to the actuator and NOT to the controls.
→
Respect total weight of combination (actuator, actuator controls, gearbox, valve)
→
Secure load against falling down, sliding or tilting.
→
Perform lift trial at low height to eliminate any potential danger e.g. by tilting.
Figure 10: Example: Lifting the actuator
Table 5:
Weight for ACExC 01.2 actuator controls
Weight approx. [kg] with electrical connection type:
14 AUMA Ex plug/socket connector with screw-type terminals (KT)
1)
12 AUMA Ex plug/socket connector with screw-type terminals (KP)
14 AUMA Ex plug/socket connector with terminal blocks (KES), increased
safety Ex e
16.5 AUMA Ex plug/socket connector with terminal blocks (KES), increased
safety Ex d
Standard 1)
15
SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1
ACExC 01.2
Transport and storage