manualshive.com logo in svg

AUMA A 25.2, Руководство по эксплуатации, Страница: 17 / 112

Поделиться
Скачать
AUMA A 25.2 Скачать руководство пользователя страница 17

4.

Assembly

4.1.

Mounting position

The product described in this document can be operated without restriction in any
mounting position.

4.2.

Handwheel fitting

Information

For transport reason, handwheels with a diameter of 400 mm and larger are supplied
separately within the scope of delivery.

Damage at the change-over mechanism due to incorrect assembly!

→

Only pivot change-over lever manually.

→

Do NOT use extensions as lever for operation.

→

First engage manual operation correctly, then mount handwheel.

1.

Manually lift the red change-over lever while slightly turning the shaft back and
forth until manual operation engages.

➥

Manual operation is properly engaged if the change-over lever can be shifted

by approx. 85°.

Figure 11:

2.

Push handwheel over the red change-over lever then onto the shaft.

Figure 12:

3.

Release change-over lever (should snap back into initial position by spring ac-
tion, if necessary, push it back manually).

17

SAEx 25.1 – SAEx 40.1 / SAREx 25.1 – SAREx 30.1 
ACExC 01.2 

Assembly

Содержание A 25.2

















































































































Отзывы:

Нет отзывов