Auerswald COMfortel M-720 Скачать руководство пользователя страница 3

Страница: 3 / 61

COMfortel M-720 - Advanced Information - V01 08/2021

Safety precautions

Read the safety precautions and the user guide before use.

The device cannot be used in the event of a power failure. In case of a power failure it

is also

not

possible to make

emergency calls

Emergency numbers

cannot

be dialled if the

keypad/display lock

is activated!

Use only

rechargeable batteries

that correspond to the

specification

. Never use a

conventional (non-rechargeable) battery or other battery types as this could result in

significant health risks and personal injury. Rechargeable batteries, which are notice

ably damaged, must be replaced.

The handset must not be operated if the battery cover is open.
Ensure that the batteries can not be short-circuited by objects in the battery compart

ment

Do not use the devices in environments with a potential explosion hazard

(e.g. paint shops).

The devices are not splashproof. For this reason do not install them in a damp environ

ment such as bathrooms or shower rooms.

Use only the power adapter indicated on the device.
Whilst charging, the power socket must be easily accessible.

Remove faulty devices from use or have them repaired by our Service team, as these

could interfere with other wireless services.

Do not use the device if the display is cracked or broken. Broken glass or plastic can

cause injury to hands and face. Send the device to our Service department to be

repaired.

Keep small cells and batteries, which can be swallowed, out of the reach of children.

Swallowing a battery can lead to burns, perforation of soft tissue and death. Severe

burns can occur within 2 hours of swallowing.

In the case of a swallowed cell or battery, seek medical care immediately.

Using your telephone may affect nearby medical equipment. Be aware of the tech

nical conditions in your particular environment, e.g. doctor's surgery. If you use a

medical device (e.g. a pacemaker), please contact the device manufacturer. They will

be able to advise you regarding the susceptibility of the device to external sources of

high frequency energy.

If a USB adapter cable is included, only use a USB power supply (5Volt) with USB-A

connection. The use of other voltage sources e.g. PC's with USB connection can cause

damage.
If a plug-in power supply is included, please use this power supply.

Содержание COMfortel M-720





























































Результаты поиска

Содержание COMfortel M-720

Отзывы:

Похожие инструкции для COMfortel M-720

Бренды по названию

Популярные бренды

Auerswald COMfortel M-720, Расширенная информация

Результаты поиска

Содержание COMfortel M-720

Отзывы:

Похожие инструкции для COMfortel M-720

Бренды по названию

Популярные бренды