COMfortel M-720 - Advanced Information - V01 08/2021
19
Network services
Network services are dependent on the phone system and network provider.
Deactivating Calling Line Identification for the next call
By default for an outgoing call, the phone number is sent and can be shown with the caller on
the display (CLIP = CLI Presentation). When the caller's number is withheld, it is not shown on the
called party’s display. The call is made anonymously.
¤
. . . Use
to select
Select Services
OK
Next Call Anonym.
OK
. . .
Use
to enter the number
Dial
. . . The connection is established without CLI
Call divert
When call divert is enabled, incoming calls are forwarded to another connection.
¤
. . . Use
to select
Select Services
OK
Call Divert
OK
Select
when call divert is to apply
OK
Call waiting
During a call, a call waiting tone indicates another caller. If the number is being transferred, you
you see the number or the name of the caller on the display.
Once you have accepted the waiting call, you can switch between the two parties (
Call Swap
) or
speak to them both at the same time (
Conference
).
Prevent/permit call waiting
¤
. . . Use
to select
Select Services
OK
Call Waiting
OK
To activate/deactivate the features, a code is sent to the telephone network.
All Calls
:
Calls are forwarded immediately.
No Answer
:
Calls are diverted if no one accepts the call within several rings.
When Busy
:
Calls are diverted if the line is busy.
Enable/disable:
¤
Status:
. . . Use
to select
On
or
Off
Enter the number for call divert:
¤
To Phone Number
. . . Use
to enter the number
Enable:
¤
Send
Reject waiting caller:
¤
Reject
. . . The waiting caller hears the busy tone
Accepting a call:
¤
Accept
Enable/disable:
¤
Status:
. . . Use
to select
On
or
Off
Enable:
¤
Send
