audisse Shirudo, Инструкция по эксплуатации

Страница: 26 / 128

26
Once the key is entered the sound system should connect to your network. Please skip to
step 11.
10. WPA and WPA2 are similar, although WPA2 offers a higher level of security. Whichever
you selected in step 7, you then have to specify the variant used. They are TKIP (Temporal
Key Integrity Protocol) and AES (Advanced Encryption Standard). As previously, the setting
should match that used by your router. Some routers allow both to be specified, and the
router will use whichever variant is supported by the connected device. AES is regarded as
the more secure option if it is available.
11. The sound system will then require you to enter the encryption key. This must be a string
of between 8 and 63 characters and must be identical to the key that has been entered into
your router. Note - the encryption key is sensitive to the use of upper and lower case letters
and symbols. Take care to enter the key exactly, or the radio will not be able to connect to
your router. The three controls on the right-hand side of the screen have special functions.
You can quickly access these by pressing the Info button and then use the Tuning/Seek/
Select control as needed:
Select ‘BKSP’ to erase a character just entered (long press to clear)
Select ‘OK’ when the complete key has been entered
Select ‘CANCEL’ to cancel and go back to the SSID settings screen
Once the key is entered the sound system should connect to your network.
While the sound system is trying to connect to the network, it will display ‘Processing...’ when
checking the encryption key (if using the WiFi connection) and then ‘Connecting...’. If the
connection is made successfully, the sound system will return to the Network settings menu.
If the unit cannot connect, then it will display a ‘Failed to connect’ message and will return to
the SSID entry screen (step 6). Once connected, the network settings are stored in the sound
system. The settings are retained when the sound system is disconnected from the mains.
You may now use the Back and Source buttons to access the functions of Audisse Shirudo.
Network wizard
WPS Setup
View settings
Wlan region >
Manual settings
Network settings
Please wait
Connecting ...
Network settings