audisse Shirudo, Инструкция по эксплуатации

Страница: 22 / 128

22
The three controls on the right-hand side of the screen have special functions. You can
quickly access these by pressing the Info button and then using the Tuning/Seek/Select
control as needed:
select ‘BKSP ‘ to erase a character just entered (long press to clear);
select ‘OK ‘ when the complete key has been entered
select ‘CANCEL ‘ to cancel and re-run the Network Wizard
After the final character of the WEP or WPA key has been entered, highlight the ‘OK’ symbol
and press the Tuning/Seek/Select control. The screen will show ‘Connecting...’ and then
‘Setup wizard completed’. Press the Tuning/Seek/Select control to the exit setup wizard. The
sound system should now be able to connect to the network.
10. Once you have connected Audisse Shirudo to the network (and therefore also to the
Internet) it will display the Main menu. Press the Power button to put the sound system into
Standby/Off mode. It should then display the time as obtained from the Internet. If the time
display is not correct for any reason, it can easily be adjusted later, ‘Manually setting the
clock’.
CHANGING THE NETWORK CONNECTION
In the sections above, you chose how Audisse Shirudo would be connected to your network,
either using a WiFi connection. From time to time, you may find that you need to connect
to different computer networks. The Internet setup menu allows you to change your radio’s
network settings, scan for an alternative wireless network, or to manually configure the
Please wait
Connecting ...
Network settings
Setup wizard
completed
Setup wizard
Press ‘SELECT’ to exit
09:30
12 / 02 / 2016
SOURCE
MENU
FWD.
BACK
INFO
TUNING
SEEK/SELECT
VOLUME
EQUALIZER
PRESET
PRESET -
PRESET +