Page 32
LIVEtouch20
- 20 Channel Digital Mixing Console
English
Enter the effects section in the Setup dialog box and choose GEQ1 or GEQ2 and enable RTA.
Note that there are two normal modes (below) and others that will show small changes more clearly.
The mode you use doesn't matter here.
Now click Measure, a dialog box will appear indicating that the instrument will start measuring for 60 seconds. Do
not touch the faders or buttons during the measurement process, as this can have a significant influence on the
result.
When the measurement is complete, the Measure button turns off. Now close the GEQ page and insert the GEQ
into the L&R bus either via the effects page or in the input section of the L&R bus. Then go back to the GEQ, lower
the Master fader and click Apply, which will change your faders to equalize according to the last bar.
Please note that frequencies below 40Hz and above 16kHz are not automatically corrected, so you must set them
manually.
