manualshive.com logo in svg

audiophony LIVEtouch20, Руководство пользователя

Поделиться
Скачать
audiophony LIVEtouch20 Скачать руководство пользователя страница 13

Page 13

LIVEtouch20

 - 20 Channel Digital Mixing Console

English

4-1-6 Output stage sub-page

1

2

3

5

6

4

1

 

- Channels selector

Allows you to switch from one channel to another while remaining on the same page.

2

 

- Panoramique

Controls the panning of the Master output. The default value is 50|50 (middle). The PAN value can be changed by 
the encoder on the screen or by turning the control dial. Press the numerical control of the setting twice to reset 
the setting to its default value.

3 - Solo

This is a copy of the SOLO hardware button on the front panel. Press to enable or disable the signal sent to the 
solo monitor bus.

4 - Mute

Like Solo, it is a copy of the M button on the front panel. Press to mute or not the channel, which will mute or 
mute all pre- and post-fader sends from the active channel to all buses, including the L/R Master.

5 - Fader

This is a copy of the physical fader of the selected channel. You can change the fader on the screen and the 
physical fader will follow accordingly. Press the numerical control of the setting twice to reset the setting to its 
default value.

6 - Vu-meter

This displays the pre-fader level of the signal, so regardless of the fader setting, the signal will be displayed here if 
it is present.

Here you can set the pan and level of the Master as well as the Solo / Mute.

Содержание LIVEtouch20









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды