manualshive.com logo in svg

audiophony LIVEtouch20, Руководство пользователя

Поделиться
Скачать
audiophony LIVEtouch20 Скачать руководство пользователя страница 10

Page  10

LIVEtouch20

 - 20 Channel Digital Mixing Console

English

1

 

- Channels selector

Allows you to switch from one channel to another while remaining on the same page.

2

 

- Side chain

This function allows you to use the signal from another channel to control the compression of the selected 
channel. This can be useful when channel groups are used for a single instrument (for example, drums) to ensure 
consistency of compression of all channels within the group. Click the drop-down button and select the channel 
to use as the "Side chain" to control the active channel. The selection also allows you to switch between Pre and 
Post equalization modes.

3 - Gate

IN

 : Enables the Gate to be activated. It is inactive by default.

Curve

 : The curve is divided into 3 parts - Attack (left), Hold (middle) and Release (right).

The threshold is indicated on the Y axis while the X axis indicates the relative time for each section.

Settings parameters

 : The curve is divided into 3 parts - Attack (left), Hold (middle) and Release (right).

The threshold is indicated on the Y axis while the X axis indicates the relative time for each section.

Threshold

 : The threshold varies from -80 dB to 0 dB with default -80dB. Any signal below the threshold will be 

muted, so that the signal level must exceed the threshold to pass the noise gate.

Hold

 : (hold time) : From 2 ms to 2000 ms with default 2 ms.

Attack

 : (attack time) : Range 0.5 ms to 100 ms, default 3 ms.

Release

 : (temps de relâchement) : peut être ajusté de 2 ms à 2000 ms, par défaut 350 ms, ce qui est compatible 

avec la plupart des sources sonores.

Depth

 : (release time) : can be adjusted from 2 ms to 2000 ms, default 350 ms, which is compatible with most 

sound sources.

4-1-4 Dynamics sub-page

1

5

3

4

6

2

Содержание LIVEtouch20









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды