Audionet SAM 20 SE, Руководство пользователя

Страница: 34 / 42

34
10 Phono module
The SAM 20 SE comes with a fix installed phono module. Input 6 6 is
connected to the phono module. Please connect your turn table as described
in section '
Phono ' on page 13.
10.1 Setup
Please make sure which type of pickup unit you have and which input im-
pedance and gain is recommended by the manufacturer. You need this in-
formation to adjust the phono module optimally to the pickup. In case of
doubt treat the pickup as 'MM' system and use the standard settings listed
below.
Section ' Fine tuning ' on page 37 offers more detailed information on fur-
ther adjustments.
The following picture shows the configuration elements of the phono mod-
ule:
For each channel several jumper fields are available for setting up input
impedance and gain.
Important
·
Always select the same settings for input impedance and gain on both
channels!
Gain of right channel
Input impedance of left channel
Input impedance of right channel
Gain of left channel