26
2.
Push the
power
key on the front panel or the
SAM 20 SE
key on the
Audionet Metal Remote Control. The SAM 20 SE switches to stand-by
mode.
Note
·
If you leave the By-Pass Mode by pushing the
power
key on the front
panel or
SAM 20 SE
key on the Audionet Metal Remote Control, this
mode will be saved, i.e. if you switch on the SAM 20 SE, the unit will
switch to the last saved input channel selection and thus into By-Pass
Mode.
7.3.6 Channel Name
You may assign a fully user-definable name up to 14 characters in length
to each of the six input channels. If you select the menu item
Chan-
nel Name
of the Global Setup menu, the display will show the number of
the currently selected input channel and the assigned channel name. The
cursor in the display marks the character you now may alter.
Use the keys
up
and
down
on the front panel to select the desired character.
Press key
set
for less than two seconds to move the cursor one step to the
right. After the last position the cursor wraps around and starts at the first
position again. In order to save the edited name and leave the menu item,
press and hold the key
set
for longer than two seconds.
Tip
·
To leave the menu item
Channel Name
without saving any changes
you made just wait for 12 seconds. The SAM 20 SE will automatically
get back to the normal display mode.
Содержание SAM 20 SE
Страница 1: ...1 audionet SAM 20 SE Stereo Amplifier User s Manual...
Страница 2: ...2...
