Audionet SAM 20 SE, Руководство пользователя

Страница: 9 / 42

9
4 Installation and power supply
Important
·
During connecting and removing of sources or amplifiers to the
SAM 20 SE all units of your audio system have to be switched off to
prevent damage of the SAM 20 SE or any of the other connected
units.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut cables could damage the SAM 20 SE
and/or any other connected unit.
4.1 Placement
Important
·
It is recommended to place the SAM 20 SE into a high quality rack or
onto a stable table.
·
Do not expose the unit to direct sunlight.
·
Do not cover the ventilation slots.
·
Do not place the SAM 20 SE in close range to heat sources like radia-
tors.
·
Do not place the SAM 20 SE on top of other units, especially not on
top of power amplifiers, pre amplifiers or similar that produce heat.
Both units could suffer damage from thermal overload.
·
Do not use the unit in places where it is exposed to vibrations.
·
Do not place the unit close to loudspeakers or into the corner of a room
where it is exposed to high levels of sonic energy, which might reduce
the sound quality of the unit.
4.2 Mains connection
The mains input 9
*
is on the back panel of the SAM 20 SE. To connect the
unit to mains use the included mains power cord. If you prefer to use a different
power cord make sure that it meets the specifications for your home country.
* see numbers in section ' Overview back panel ' on page 8.