Audionet SAM 20 SE, Руководство пользователя

Страница: 30 / 42

30
8.1 Key assignment SAM 20 SE
1 Power key SAM 20 SE
use the key SAM 20 SE to switch on / off your SAM 20 SE. This key
has the same function as key
power
on the front panel. If the
SAM 20 SE is in stand-by mode, press key SAM 20 SE to switch on
this unit. If the SAM 20 SE is already switched on, then pressing
SAM 20 SE
powers the unit down to stand-by mode.
2 Key CH +
selects the next input channel of the SAM 20 SE.
3 Key CH -
selects the previous input channel of the SAM 20 SE.
4 Key
VOL +
increases the volume of the SAM 20 SE.
5 Key VOL -
decreases the volume of the SAM 20 SE.
6 Mute key
mutes the SAM 20 SE. Press again to resume last volume level.
8.2 Changing the batteries
In order to exchange the batteries of your Audionet Metal Remote Control,
first you have to remove the 6 Allen key screws on the bottom side.
The battery compartment is to the left side of the circuit board. You need
2 batteries type 'AAA' or 'Micro' with a voltage of 1.5V.
Battery compartment