Audionet PRE G2, Руководство пользователя

Страница: 9 / 39

9
4 Installation and power supply
Important
·
During connecting and removing of sources or amplifiers to the
PRE G2 all units of your audio system have to be switched off to
prevent damage of the PRE G2 or any of the other connected
units.
·
Please make sure that all cables are in absolute best conditions!
Broken shields or short-cut cables could damage the PRE G2
and/or any other connected unit.
4.1 Placement
Important
·
It is recommended to place the PRE G2 into a high quality rack or
onto a stable table.
·
Do not expose the unit to direct sunlight.
·
Do not place the PRE G2 in close range to heat sources like radiators.
·
Do not place the PRE G2 on top of other units, especially not on top
of power amplifiers, pre amplifiers or similar that produce heat. Both
units could suffer damage from thermal overload.
·
Do not use the unit in places where it is exposed to vibrations.
·
Do not place the unit close to loudspeakers or into the corner of a
room where it is exposed to high levels of sonic energy, which might
reduce the sound quality of the unit.
4.2 Mains connection
The mains input 12
*
is on the back panel of the PRE G2. To connect the
unit to mains use the included mains cord. If you prefer to use a different
power cord make sure that it meets the specifications for your home country.
Important
·
The electrical specifications of your home country must meet the
electrical specifications printed onto the back panel.
*
see numbers in section ' Overview back panel ' on page 8.