Audionet PRE G2, Руководство пользователя

Страница: 14 / 39

14
6.3 Mains phase detection
The correct polarization of mains is important for reasons of audio clarity
and stability. Please connect the mains cord that the 'hot' pin of the wall
outlet is connected to the pin marked '
PHASE ' 13 of the mains input 12
on the back panel. The PRE G2 recognizes the incorrect polarization of
the mains plug automatically. Right after switching on the unit from
stand-by mode by pressing the
power
key on the front panel the follow-
ing message will appear in the display in case the mains polarization is
incorrect:
Attention: Mains
Phase incorrect!
If you read the above message, switch off the unit by pressing the power
key. Please wait until the display no longer reads Going to sleep.. .
Disconnect the PRE G2 by operating the mains switch 14 . Now pull the
mains plug and re-insert it into the mains socket rotated by 180°.
If you switch on the unit again, the warning should not appear now.
Important
·
If the PRE G2 issues the mains polarization warning or no warning at
all for both positions of the mains plug, check the connection to earth
of your mains socket and mains cord.
You have to ensure a stable
connection to earth for the mains phase detection of the PRE G2
to work correctly!
6.4 Using Audionet Link
Your PRE G2 is equipped with two 'Audionet Link' outputs 11 allowing
you to switch on/off further Audionet units (e.g. power amplifiers, CD
player or tuner) connected via 'Audionet Link' (see also section '
Audionet
Link ' page 12).
If the rest of your Audionet system is connected to your PRE G2 via
'Audionet Link', all linked units will be automatically switched on/off as
soon as you switch on/off the PRE G2 using the
power key on the front
panel or the remote control.
Note
·
The 'switch on/off' signal is issued to both 'Audionet Link' outputs of
the PRE G2 simultaneously. Thus, both outputs are identical in their
function and may be used either in combination or separately.
·
Please read section ' Audionet Link ' on page 12. Also, consult the
user's manuals of your Audionet components connected via 'Audionet
Link' for further information.