Audionet PRE G2, Руководство пользователя

Страница: 20 / 39

20
Note
·
If you make no adjustments for longer than 12 seconds the PRE G2
will automatically leave the setup menu and return to normal opera-
tions mode.
·
While you are in the setup menu the display brightness is set to 100%
for better readability. After leaving the setup menu the display
brightness is automatically reset to is user selected level.
·
If you power down the PRE G2 to stand-by mode all settings are
stored automatically in the non-volatile memory of the unit. Even af-
ter disconnecting from mains the PRE G2 will still remember your
settings.
In the following all options of the setup menu are explained in detail.
7.1 Set Dim Level
To adjust the brightness of the display on the front of the PRE G2 press
the
set key once for less than two seconds.
Now use the volume knob to select the desired brightness. Turn clock-
wise to increase or turn counter clockwise to decrease the brightness.
Important
·
Long-term usage of the display set to maximum brightness (set-
ting 100%) may cause extended signs of wear resulting in a decay
of contrast or brightness of individual dots in the display. Do not
use the display with a brightness set higher than the factory de-
fault of 50% over a longer period of time!
Note
·
Is the brightness set to
Off
the display is only on during setup or
volume adjustments. It switches off automatically several seconds af-
ter the last user entry.
SET DIM LEVEL:
██████ ______ 50%
current brightness setting