- Caller display (CLIP) -
45
6.1
Viewing the caller list
Before you can work on the caller list, press several times the
CLIP/
/
button, until you see the message
Caller list
appearing in the display.
You can page through the caller list using the Jogdial. All calls registered will be
shown as follows:
01234/1
234567
Peter
The caller called
several times
The call
is new
Name of the caller, if
stored in the phone book
Phone number
of the caller
Time and
date
Memory location in
the caller list
945
REPEAT
NEW
16
/
#
06
CLIP
04
0
When you reach the last storage location in the list, the display will show the
message
ENDE DER LISTE
.
Note!
When all newly recorded numbers have been checked, the new call indicator light
goes off and the
NEU
indicator in the display shows "0".
If no button is pressed within 15 seconds, the caller list is no longer displayed and
the display shows the current time and date once more along with the number of
telephone numbers stored in the caller list and the number of newly stored
telephone numbers.
6.2
Dialling a telephone number directly from the caller
list
You can dial telephone numbers directly from the caller list.
1.
Select the required telephone number using the Jogdial.
2.
To dial the number, press the
ENTER
button. The handsfree facility will be
switched on automatically and the number will be dialled.
3.
If you want to change to using the receiver, simply lift the receiver.
Note!
Before dialling, your telephone compares the country and local dialling codes of
the number selected with your location (c local dialling code). If you have
entered your country and local dialling code during installation, the appropriate
numbers will not be dialled if this is a number from within your country or local
network.
