- Caller display (CLID) -
44
6.1 Viewing the caller list
You can page through the caller list using the Jogdial. All calls registered will be
shown as follows:
11:43 16/1
08
NEW
Time/date of call
Number has
been newly
registered
Store location in
the caller list
currently selected
When you reach the last storage location in the list, the display will show the
message ENDE DER LISTE.
Note!
When all newly recorded numbers have been checked, the new call indicator light
goes off and the NEW indicator in the display shows "0".
If no button is pressed within 30 seconds, the caller list is no longer displayed and
the display shows the current time and date once more along with the number of
telephone numbers stored in the caller list and the number of newly stored
telephone numbers.
6.2 Dialling a telephone number directly from the caller
list
You can dial telephone numbers directly from the caller list.
1. Select the required telephone number using the Jogdial.
2. To dial the number, press the
ENTER
button. The handsfree facility will be
switched on automatically and the number will be dialled.
3. If you want to change to using the receiver, simply lift the receiver.
Note!
Before dialling, your telephone compares the country and local dialling codes of
the number selected with your location (c local dialling code). If you have
entered your country and local dialling code during installation, the appropriate
numbers will not be dialled if this is a number from within your country or local
network.
