- Alarm Unit -
74
To use the functions described here, you need
S
the
handset
,
S
the
alarm unit
S
and the
DTMF programming unit,
subsequently referred to as
programming unit
.
DTMF=Dualtone Multi-Frequency
INFORMATION ON PROGRAMMING
S
Press
q
on the alarm unit to cancel a process during programming.
S
Press
#
on the programming unit to confirm a setting.
S
Press
#
again to exit from Programming mode.
S
To program the unit, hold the programming unit above
the
handset
microphone. Otherwise, it may not receive the
keytones properly.
Note:
When programming, maintain a clearance of at least 1 m between the handset and alarm unit and lower the
volume setting of the alarm unit. Otherwise, interference noise could be produced which affects programming.