- Operation -
52
Note:
While the handset/alarm unit is ringing, the
D
and
E
buttons can be used to change the ringing volume.
To end the call, replace the handset in the base station or press the Call button
C
.
Note:
Information on the display of the phone numbers is provided in Chapter 6.
4.3
Making a call
1. Enter the phone number to be called, with max. 32 digits, using the digit keypad. Since the display can only
show a maximum of 12 digits, only the last 12 digits are displayed in the case of longer phone numbers.
Note:
If you have entered a wrong digit, press the
A
button to delete it. Press and hold the
A
button to delete
the entire phone number.
2. Press the Call button
C
and the required connection is established.
Note:
It is also possible to press the Call button
C
first to obtain the dialling tone. Enter the phone number
required. The telephone dials the number directly. However, individual digits cannot be deleted and
corrected when using this method of dialling phone numbers.
4.4
Handsfree
Press the Handsfree button
b
before dialling or during a call. You then hear the dialling tone or the caller via the
loudspeaker on the handset.
By pressing the Handsfree button
b
as necessary, it is possible to switch between normal and handsfree operation
during a call.
Always end the call being carried out using the handsfree function by pressing the Call button
C
.
4.5
Internal calls (intercom function)
As soon a second handset or alarm unit is registered on a base station, they can be used free of charge for internal
calls.
To do this, press the
I
button and then the internal number, 1 or 2, of the required handset. The call is taken by
pressing the Call button
C
on the receiving handset.
Note:
If the other handset is being used for an external call, the control lamp on the receiver lights up on all the
handsets. It is not possible to carry out a second external call.
4.6
Connecting external calls to the other handset
If you have taken an external call on a handset, the call can be transferred to the other handset or alarm unit. To do
this, press the
I
button and then the internal number (1 or 2) of the required handset/alarm unit.
If the handset called does not answer, take the call back by pressing the
I
button.
