- Sending and receiving SMS -
59
The EATONI © text recognition system
The problem is as old as SMS: the telephone keypad has 12 number keys, but, for
entering letters, at least 26 are required - plus special characters. For this reason,
several letters are assigned to each button. With the classical method of entry, it is
necessary to press the buttons several times.
The EATONI © text recognition system uses a knowledge of linguistics and chaos theory
to describe languages in terms of computational rules. Because the system always
assumes the most likely combination of letters, its success quota is very high even at the
entry stage. If the automatic selection is wrong, the incorrect character is corrected with
the
/
button while entering the text and the correct text is thus shown in the
display.
7.2
Reading SMS messages received
As soon as an SMS message is received, you will hear a signal tone and you will be
informed via the display. The incoming SMS messages are stored in the INBOX folder. A
maximum of 50 SMS messages can remain stored in the telephone. The number may
vary depending upon the length of the SMS messages. When the memory is full, an
appropriate warning will appear and you must delete either individual or all SMS
messages.
1.
Press the
SMS
button.
2.
Select the
Inbox
function using the
button and confirm with the
button.
A list of all the received SMS messages will now appear in the display. The first words
of each received SMS will be visible.
3.
Now select the required SMS using the
and
buttons. SMS messages that
have not yet been read are identified with a symbol.
4.
Confirm with the
button. The SMS can now be seen in the display. You can scroll
the text using the
and
buttons.
5.
After you have read the text, confirm with the
button.
6.
The following options will now appear in the display:
Delete?
– SMS will be deleted from the SMS inbox.
Reply
– A new SMS can be created directly for the sender.
Forward
- The SMS can be forwarded to another subscriber.
Now select the required function using the
and
buttons. Confirm with the
button and follow the instructions in the display or exit this menu item by
pressing and holding the
/
button.
