- Safety notices -
44
Location of the base station
The base station must be located within reach of a 230Volt supply socket. To avoid
interference problems, do not place the base station in the immediate proximity of other
electronic equipment such as a microwave oven or hi-fi system. The location of the base
station can significantly influence the proper function of the telephone.
Place the base station on a level, non-slip surface. The feet of the base station will not
normally mark the surface on which it stands. However, the wide range of surface
finishes in use renders it impossible to exclude marking of any surface.
Do not use the handset in areas where there is a danger of explosion.
Avoid excessive exposure to smoke, dust, vibration, chemicals, humidity, high
temperature or direct sunlight.
Note for medical products
The telephone works with very low transmitted power. Present knowledge and research
indicate that, at this low power level, there is no possible danger to health. It has,
however, been shown that portable telephones, when switched on, can affect medical
equipment. Maintain a distance of at least one metre from medical equipment.
Disposal
If the batteries or the complete system have reached the end of their useful life, please
dispose of them in an environmentally friendly manner and as required by law.
Temperature and ambient conditions
The telephone is designed for indoor use and an operating temperature range of 10 °C to
30 °C.
The base station must not be installed in humid areas such as bath or wash rooms. Avoid
proximity to sources of heat such as radiators and do not expose the unit to direct
sunlight.
Cleaning and care
The outer surfaces of the unit can be cleaned with a soft, dry, lint-free cloth. Never use
cleaning agents or aggressive solvents. Apart from occasionally cleaning the outer
surfaces, no further care is required. The rubber feet of the base station are not resistant
to all cleaning agents. The manufacturer cannot, therefore, be held responsible for
damage to furniture etc.
CE marking
The telephone is compliant with the essential requirements of the R&TTE Directive. This
is certified by the CE marking.
