AudioControl Maestro M2e, Руководство для удовольствия владельца

Страница: 31 / 62

Phone 425-775-8461 • Fax 425-778-3166
®
31
tm
ADV 4 - Zone 2 Settings
M
AX
V
OLUME
- This works just like the Main Zone maximum
volume setting back in the basic menus. It limits the maxi-
mum volume control setting for the Zone 2 output.
F
IXED
V
OLUME
- If you are using the Zone 2 output from the
Maestro M2e to feed into another stereo receiver in the
remote zone, you will want to set this option to Yes. This
provides a constant signal level so you can use the volume
control on the receiver in the second zone to control it’s
volume. Install Hint: Set the desired output volume level
for Zone 2 with the volume control before setting this op-
tion to on. The Maestro M2e locks the Zone 2 output at the
current volume setting when this option is set to on.
M
AX
. O
N
V
OLUME
- Sets the maximum volume that the Zone
2 output will play when the power is turned on.
S
TAND
-
BY
- Allows Main Zone (zone 1) to be put into stand-
by either locally or by zone 2.
L
OCAL
O
NLY
– Only the main zone switches into stand-by
from main zone
A
LL
O
FF
– Both the main zone and Zone 2 can be switched
into stand-by from the main zone.
A
CCESS
- Limits which sources are available to Zone 2. To set
this option: Press the source input buttons to toggle a selec-
tion on or off using the optional remote control.
ADV 5 - Input Trims
Adjusting the Source Unit Input Volume Trims - The input
trims allow the installer to match the relative volumes of
all sources so when you switch from one source to another
the relative volume level will be balanced. These trims af-
fect only the two channel analog audio inputs from each
source. There is no change to the digital audio levels.
The available output options are Low .5V, Medium 1V, Ref-
erence 2V and High 4V. The reference 2 volt setting should
be appropriate for most sources. To set the levels for a
source, select a loud music selection or use a 0dB reference
disk and switch between sources. If one source is notice-
ably louder or quieter than others, make the appropriate
level settings to that source.
Adv4 - Zone 2 Settings
Zone2 Vol:
--------I-------- 36dB
Max Vol 20-83: 83
Fix Vol: No
Max On Vol: 50
Standby: Local Only
Access: ALL
Adv5 - Analogue Settings
DVD: Low 0.5V
Sat: Low 0.5V
AV: Low 0.5V
AUX: Low 0.5V
VCR: Low 0.5V
Tape: Low 0.5V
CD: Low 0.5V
Advanced Setup Menus