AudioControl Maestro M2e, Руководство для удовольствия владельца

Страница: 21 / 62

Phone 425-775-8461 • Fax 425-778-3166
®
21
tm
HDMI Signals
The HDMI inputs and outputs on your Maestro M2e accept
digital video signals.
Input Configuration
The Component video inputs are fully assignable to the
sources. This allows you to configure the Maestro M2e to
accept the video input from a particular source unit on one
of the three Component video inputs.
IR Remote Control Connections
Since the Maestro M2e is often hidden away in some dark
closet or equipment rack, we have provided connections
for external IR remote control receivers and emitters. This
allows you to place the infrared receiver where it can “see”
the signal from the remote control. The Zone 2 IR input
controls the second zone functions of the Maestro M2e and
also repeats commands to the source units through the
emitter output.
The IR receiver input connections are wired with a 3 con-
ductor 3.5mm jack. The signals are compatible with third-
party receivers such as a Xantech No. 291-10.
AudioControl does not supply the IR receivers or emitters to
use with the Maestro M2e.
T
IP
IR Signal
R
ING
Ground
S
LEEVE
Current L12 VDC (30 mA max.)
Set-Up & Configuration