CHAPTER 6 Hardware Maintenance
MP-1288 | Hardware Installation Manual
Figure 6-13: Inserting Screwdriver into Cover Plate Hole
Figure 6-14: Removing Cover Plates
3.
On the front panel, remove the Fan Tray cover and Fan Tray module, as described in
4.
Hold the blade on its front where the captive screws are located, making sure that you do
not touch the blades electrical components.
5.
On the chassis front panel, orientate the FXS blade as shown in the figure in Step 1.g in
on page 43, and then gently slide the blade into the slot, keeping the
left side of the blade aligned with the left guiding rail located above the captive screw
socket, and ensuring that the notch on the underside of the blade is aligned to the left of
- 47 -
