AudioCodes MediaPack MP-1288, Руководство по установке оборудования

Страница: 19 / 60

CHAPTER 3 Physical Description
MP-1288 | Hardware Installation Manual
Item
#
Description
2 Power cord anchor clip.
3 3-Prong power inlet.
4 LED for indicating power status. For more information, see Power Supply LED on
page 16.
5 Handle for extracting and installing module.
The two Power Supply modules installed in the chassis must be of the same hardware
revision. For more information, see the note in on page 50.
DC Power Supply Module
For the DC-powered model, the device provides two DC Power Supply modules for load
sharing and power redundancy.
Power surge protection, caused for example from lightning, is also supported. For more
information, see
Grounding and Surge Protection on page 19.
The Power Supply module is available as a spare part. The Power Supply modules are hot-
swappable and therefore, if only one needs to be replaced, it can be done while the device is
receiving power from the working Power Supply module. For replacing Power Supply modules,
see
on page 50.
Figure 3-11: DC Power Supply Module
Table 3-11: DC Power Supply Module Description
Item # Description
1 Release latch for releasing and securing module from / to chassis slot.
2 DC power inlet.
3 Handle for extracting and installing module.
- 13 -