CHAPTER 2 Setting up the Phone
C448HD C450HD | Users & Administrator's Manual
If the phone model you have has an Expansion Module attached, wall mounting isn't
supported.
➢
To mount the phone on a wall:
1.
Attach the stand of the phone for the purpose of a wall mounting:
a.
Detach the base.
b.
Attach it again as you did for a desktop mounting (see
previous page) only now make sure that it's flatly aligned to lie flush against the wall,
i.e., slide the inner rails of the phone stand onto the phone base's inner notches.
2.
Connect the AC power adapter, LAN and PC/laptop cords.
3.
In the wall, drill two horizontal holes at a distance of 4 7/8 inches (123.8 mm) from one
another, in line with the template.
4.
Insert two masonry anchors into the holes if necessary.
5.
Thread two screws (not supplied) into the two masonary anchors; ensure that the heads
extend sufficiently (about 3/16 inch or 5 mm from the wall) for the phone stand's keyhole
slots to hang on.
6.
Hang the phone stand's keyhole slots on these screws.
Installing the Expansion Module (Sidecar)
Applies only to the C450HD phone model.
See
for a tutorial | demo on how to install the phone's Expansion Module (sidecar).
- 18 -
