Alarm clock
TV Sound Stand
GB
60
CUSTOMER SERVICE
www.gt-support.de
00800 - 45622000
GB
12. ALARM CLOCK
NOTE:
the time must be correctly adjusted before the alarm time is set.
You can either be woken up by an alarm or the radio.
Setting the alarm time
1.
The sound stand must be in standby mode. Switch it off if necessary using the
button.
2.
In standby mode, press
ALARM
for about 2 seconds.
TIMER SET
appears. The hour
display then flashes (
0).
3.
Press
VOL
+/-
in order to adjust the hours.
To save the setting, press ALARM.
The minute indicator flashes
(
00).
4.
Press
VOL
+/-
in order to set the minutes.
To save the setting, press ALARM.
Wake-up mode flashes.
5.
Press
VOL
+/-
in order to move between
BUZZER
(alarm sound) and
FM
(radio).
To
save the setting, press ALARM. The display of the volume flashes and can be
adjusted from
VOL 05
to
32
.
6.
Press
VOL
+/-
in order to the set the desired volume.
To save the setting, press
ALARM. The display shows
TMR
.
ON
or
OFF
flashes.
7.
Press
VOL
+/-
in order to turn the alarm on or off.
To save the setting, press
ALARM.
NOTES:
•
If the radio has been selected as the alarm, you will be woken up by the last se-
lected station.
•
The alarm is also activated if the device is already switched on.
•
If you do not press a button for approx. 15 seconds while programming an alarm,
the settings will not be saved.
Switching the alarm on and off
If a wake-up time has been set, press the
ALARM
button briefly in standby mode in order
to move between
TMR ON
(alarm on) and
TMR OFF
(alarm off). If the alarm is switched on,
the alarm symbol
appears on the display.
Switching off the alarm
•
When the alarm sounds at the set time, press the
button. The alarm is switched
off and remains active for the next day.
•
The alarm is automatically switched off after 60 minutes.
_TVS264_2018_Soundstand_AudioAffairs.book Seite 60 Donnerstag, 30. August 2018 9:17 09
