Operation
TV Sound Stand
GB
56
CUSTOMER SERVICE
www.gt-support.de
00800 - 45622000
GB
10.3 ACCESSING VARIOUS SOURCES
In order to switch to the different sound sources, use the remote control or the
but-
ton on the device.
•
Press the
button repeatedly until the corresponding display appears.
10.4 CONTROL THE VOLUME
•
Press the
VOL
+/-
buttons to adjust the volume. If the maximum or minimum vol-
ume is reached,
VOL MAX
or
VOL MIN
appears on the display.
•
Press the
+/-
buttons on the device in order to set the volume.
•
Press the
MUTE
button to switch off the sound temporarily.
MUTE
appears on the
display. Use the
MUTE
button or the
VOL
+/-
buttons to switch the sound back on.
•
When you switch on the device from standby, it automatically switches on …
... with volume level
8
, if the level was set between
VOL MIN
and
8
when it was
switched to standby.
... with the same volume level as when it was switched off, if the level was set
between
9
and
18
when it was switched to standby.
... with volume level
19
, if the level was set between
19
and
VOL MAX
when it was
switched to standby.
Sound and connection types
Depending on the connection you use to transmit the sound from the TV to the TV sound
stand, the sound setting can only be set on the TV sound stand or also on the TV. This
may also vary from TV to TV.
-
If you have an HDMI (ARC) TV and this is connected to the TV sound stand via an
HDMI (ARC) cable, you can control the volume using the remote control of the TV
or the remote control of the TV sound stand. In both cases, only the volume of the
TV sound stand is changed.
-
If you have connected the
AUX
input to the TV with an audio cable, always con-
trol the volume of the devices with their own remote controls.
Sound source
connected
on/via
Press on the remote control
Shown on the display
HDMI ARC
HDMI
TV ARC
COAXIAL
COAX
COAXIAL
AUX AUX
AUX
Bluetooth
connection
BT
BT
NO BT
if no device is connected.
Radio
FM
FM
_TVS264_2018_Soundstand_AudioAffairs.book Seite 56 Donnerstag, 30. August 2018 9:17 09
