Audio Authority Access EZ 922, Руководство по установке системы

Страница: 17 / 52

17
C. Set the Address Switches.
Remember, begin with Group 0/ 00 for the first module in the Source Group,
and the next module is 0/01. If the Receiver Product Group is next, the first 945
module will have an address setting of 4/00 ( Figure 26 ), so the first module in the
Front Speaker Product Group would be 4/00 as well ( Figure 27 ). For an example
system showing addressing, see Appendix A .
D. Set the Programming Switches.
Determine the settings for any remaining switches on each module.
S M B T D (Single Ch., Multi Ch., Bypass, Time, Delay)
The 942 Amplifier Module has an array of five switches used mostly for
Car Audio Demonstration. All of these switches should be OFF in a home
audio demonstration system unless Bypass is required.
Bypass
The Bypass switch should be set to OFF unless you wish to bypass
the Source Group. A recordable DVD player is an example of a Source
Group that might be bypassed. The Product Group will be bypassed
when all the products in that group are unselected. The “bypass
module” is always the last module in the Product Group (only the
bypass module should have the Bypass
switch ON.) For more on bypass,
see the
index .
Left – Right
The 932 Speaker Module (shown right)
has a Left – Right switch in the lower
left-hand corner. For Left speakers,
switch it to the “left,” for Right, to the
“right.” For speakers such as mono
centers or mono subwoofers, the switch
should be set to the “right” position.
E. Fill Out the Labels.
Check all switch settings against your addressing
plan or system drawing. Each module has blank
boxes printed on the metal case. After you have
established your switch settings, use this space
to record the correct settings. Fill in the outlined
arrows with the actual product numbers to be
switched by this module as shown in Figure 27 .
This process will help with maintenance and
troubleshooting later.
Figure 27. The 932 module serving the right channel of speakers 1-8 (note the filled-in
identification boxes.)
Figure 26. Model 945 Receiver