Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Open cover for jump start connection (+) -2- in direction of
-arrow-.
– First connect charger clamp (+) to jump start connection (+)
-3-, and ensure that charger clamp does not make contact with
bonnet when it is closed.
– Then connect charger clamp (-) to earth point (-) -1- on body,
and ensure that charger clamp does not make contact with
bonnet when it is closed.
– Arrange wiring of battery charger - VAS 5906- neatly in engine
compartment.
– Switch on battery charger - VAS 5906- and adjust settings as
needed.
– Position battery charger - VAS 5906- under vehicle so that it
is hidden from view as well as possible, ensuring that ventila‐
tion grille of charger is unobstructed.
Procedure for disconnecting battery charger:
Remove in reverse sequence.
3.10
Brake fluid: changing
WARNING
Risk of accident if the brake pedal has too much free play.
♦ Make sure that the brakes work properly before the vehicle
is driven on the road.
WARNING
Risk of injury due to caustic brake fluid.
♦ Avoid contact with skin.
Caution
Risk of damage due to improper handling of brake fluid.
♦ Avoid contact with vehicle paint.
♦ Avoid contact with liquids containing mineral oils (oil, pet‐
rol, cleaning agents).
Special tools and workshop equipment required
Audi A8 2010 ➤
Maintenance - Edition 11.2014
36
3. Maintenance
