Audi A8 2010, Руководство по обслуживанию

Страница: 36 / 142

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Open battery terminal covers.
Procedure:
– Check by hand that battery terminal clamps of battery -A- are
securely seated. If necessary tighten nuts -1- and -2- to speci‐
fied torque (see table of tightening torques for installation
⇒ page 31 ).
– Check by hand that battery terminal clamps of second battery
-A1- are securely seated. If necessary tighten nuts -3- and
-4- to specified torque (see table of tightening torques for in‐
stallation).
– Check by hand that battery -A- and second battery -A1- are
securely installed. If necessary tighten securing bolts -2- and
-3- on shared retainer plate -1- on battery base to specified
torque (see table of tightening torques for installation
⇒ page 31 ).
Install in reverse sequence.
3.8 Battery: checking electrolyte level
The battery is located in the luggage compartment.
Note
Batteries must not be opened.
Battery without magic eye ⇒ page 32
Battery with magic eye ⇒ page 33
3.8.1 Battery without magic eye
Removal steps:
– Lift luggage compartment floor and secure in position.
– Remove spare wheel (where applicable).
Audi A8 2010 ➤
Maintenance - Edition 11.2014
32
3. Maintenance