Audi 2003 A8, Руководство по ремонту

Страница: 233 / 252

Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
1 - 23 Nm
2 - Clamp (front)
❑ Installation position
⇒ page 228
❑ Before tightening, align
exhaust system so it is
free of stress
⇒ page 240
❑ Tighten bolt connec‐
tions evenly
3 - Centre silencer
❑ Combined in one unit
with rear silencer as
original equipment. Can
be renewed individually
for repair purposes
❑ Cutting locations
⇒ page 229
❑ Align exhaust system so
it is free of stress
⇒ page 240
4 - 23 Nm
5 - Clamp (rear)
❑ For separate replace‐
ment of centre and rear
silencers
❑ Installation position
⇒ page 229
❑ Before tightening, align
exhaust system so it is
free of stress
⇒ page 240
❑ Tighten bolt connec‐
tions evenly
6 - Connecting bracket
7 - Rubber mounting
❑ Renew if damaged
8 - 23 Nm
9 - Bolt
10 - Rear silencer
❑ With exhaust flap
❑ Checking vacuum unit for exhaust flap
⇒ page 246
❑ Combined in one unit with centre silencer as original equipment. Can be renewed individually for repair
purposes
❑ Cutting locations ⇒ page 229
❑ Align exhaust system so it is free of stress ⇒ page 240
11 - Rubber mounting
❑ Renew if damaged
12 - Mounting
❑ Renew if damaged
13 - 22 Nm
14 - Vacuum hose for exhaust flap
❑ From exhaust flap valve
Audi A8 2003 ➤
10-cylinder direct petrol injection engine (5.2 ltr. 4-valve), mechanics - Edition 10.2013
1. Exhaust system
227