MAINTENANCE TOOLS
Reset Thermal Models
The soft starter's thermal modelling software constantly monitors the motor's performance. This allows the starter to calculate the
motor's temperature and ability to start successfully at any time. If the EMX3 is configured for use on two motors, each motor's
temperature is modelled separately.
The thermal model for the active motor can be reset if required.
1.
Press ALT then TOOLS to open the Tools.
2.
Scroll to Reset Thermal Models and press .
Reset Thermal Models
M1 X%
M2 X%
to Reset
3.
Use
to select Reset and press STORE to confirm.
Do Not Reset
Reset
4.
When the thermal model has been reset, the screen will display a confirmation message
then return to the previous screen.
CAUTION
Resetting the motor thermal model will compromise thermal model protection and may compromise motor life. Only
reset the thermal model in an emergency.
8.3
Logs Menu
The Logs Menu provides information on events, trips and starter performance.
Press ALT then LOGS to open the Logs.
To navigate through the Logs Menu:
•
to open a log, press the button.
•
to scroll through the entries in each log, press the
and
buttons.
•
to view details of a log entry, press the button.
•
to return to the previous level, press the button.
•
to close the Logs Menu, press repeatedly.
The Logs Menu can only be opened while viewing the monitoring screens.
Trip Log
The Trip Log stores details of the eight most recent trips, including the date and time the trip happened. Trip 1 is the most recent
and trip 8 is the oldest stored trip.
To open the Trip Log:
1.
Press ALT then LOGS to open the Logs.
2.
Scroll to Trip Log and press .
3.
Use the
and
buttons to select a trip to view, and press to display details.
To close the log and return to the main display, press repeatedly.
Event Log
The Event Log stores time-stamped details of the starter's 99 most recent events (actions, warnings and trips), including the date and
time of the event. Event 1 is the most recent and event 99 is the oldest stored event.
To open the Event Log:
1.
Press ALT then LOGS to open the Logs.
2.
Scroll to Event Log and press .
3.
Use the
and
buttons to select an event to view, and press to display details.
To close the log and return to the main display, press repeatedly.
User Manual (710-04840-00M) |
29
Содержание EMX3-0023B
Страница 1: ...EMX3 Soft Starter USER MANUAL ...
