27
Saf
ety P
recautions
• Extreme changes in temperature cause condensation. Wait
until the product reaches room temperature before you bring
the product from a cold place into a warm bathroom.
• If condensation occurs inside the display, leave the product at
room temperature for a while until condensation is cleared.
• When viewing 1Seg, place the product on a stable surface.
• Do not splash the product with hot water. The product is not
resistant to hot temperatures.
• Do not bring the Quick Charge Desktop Holder (with AC Adapter)
(KYY22PUA) into a bathroom.
<At a poolside>
• Do not immerse or drop the product in pool water. Also, do not
use the product underwater.
• If the product gets splashed with pool water, immediately rinse
it off with tap water
*
in room temperature, because pool water
contains chlorine for disinfection. To wash the product, do not
use a brush, etc.
*Mild flow (6 liters per minute or less)
<In a kitchen>
You can use the product in the kitchen and other places where
water is used.
• Do not splash the product with or immerse it in soap water,
detergent water, seasonings, juices, etc. other than tap water.
• Do not immerse the product in or splash it with boiling water.
The product is not resistant to hot temperatures.
• Do not place the product where it gets extremely hot or cold
such as near a stove or in a refrigerator.
• When viewing 1Seg, place the product on a stable surface.
■
Common precautions
External connection terminal cover, specified back cover
Make sure that the external connection terminal cover is firmly
closed, and the
specified back cover is securely attached. Just
a small particle (a hair, a grain of sand, etc.) on the seals can
cause water leak.
Do not open/close the external connection terminal cover or
attach/remove the specified back cover with gloved hands. Just
a small particle (a hair, a grain of sand, etc.) on the seals can
cause water leak. Wipe off any minuscule droplets of water or
dirt with a clean dry cloth before closing the covers.
If the external connection terminal cover or specified back cover
is deteriorated or damaged, the waterproof property becomes
ineffective. In such case, contact an au shop near you.
If any liquid other than plain water gets on the product
If any liquid other than plain water (e.g. seawater, detergent,
alcohol) gets on the product, immediately rinse it with plain
water.
You can wash the product under a mild flow (up to 6 liters per
minute) of tap water at room temperature (5
℃
to 35
℃
) at a
distance of about 10 cm from the faucet or showerhead.
If the product gets dirty, wash it with your hands holding the
specified back cover and external connection terminal cover so
that they do not open. Do not use a brush or sponge.
