AU GzOne 4G LTE, Основное руководство, Страница: 38 / 89

36
G
e
tti
n
g R
e
a
d
y
Charging
The battery pack is not fully charged at the time of purchase. Charge
the battery pack when you use the G’zOne for the first time or the
battery level becomes low. Charging is finished when the LED
indicator goes out.
■
Usage Times
Continuous standby
time Approx. 460 hours (3G area)
Approx. 350 hours (LTE area)
Continuous talk time Approx. 630 min.
* These times are based on the case when the product is used in Japan. For
details on the usage time overseas, refer to “Main Specifications” ( ▶ P.75).
◎ The product and the battery pack may become warm during
charging, but this is not a fault.
◎
Charging the battery pack while using the camera function etc. may
lengthen the charging time.
◎ If you perform various operations with a specified AC adapter (sold
separately) connected to the product, charging/electric discharge
may take place repeatedly in a short time. Frequently charging the
battery pack shortens its service life.
◎ Use the common AC adapter 04 (sold separately), common AC
adapter 03 (sold separately), or common AC adapter 02 (sold
separately)* for charging overseas. These common AC adapters
support a voltage of 100 V to 240 V AC.
Only use the common AC adapter 01 (sold separately) for domestic
use with a 100 V AC power outlet. Do not charge with single phase
200 V or using a travel voltage transformer.
* To charge with the common AC adapter 01 (sold separately) or the
common AC adapter 02 (sold separately), the 18-pin microUSB
conversion adapter 01 (sold separately) is required.
◎ Properly close the external connection jack cover, the earphone jack
cover and the battery cover. Also, do not pull them forcibly or twist
them.
◎
The continuous talk time and continuous standby time are average
usage times combining the time during which a cell phone is carried
around by a user and properly receives radio waves plus the time
during which a cell phone is stationary and properly receives radio
waves. According to usage conditions such as battery level status
and temperature, the signal strength in a place where the cell phone
is used, settings of functions, etc., the usage times may be reduced
to less than half under the following cases.
•
A cell phone is frequently used in a place where (out of service
area indicator) appears on it.
•
The Wi-Fi
®
function, mail function, camera function, 1Seg function,
location information, etc. is used.
•
A cell phone is set not to enable sleep mode because of an
application etc.
•
Applications which remain activated in the background are used.
◎ If you stop charging while the LED indicator still illuminates during
charging, the cell phone may be left not fully charged even if (Full)
appears on it. In such case, the average usage times shorten.
Sleep mode
◎ With the default settings, sleep mode is not switched to automatically
even if no operation is performed for a certain amount of time during
charging. (Press
P
to switch to sleep mode.)
◎ If charging is performed without switching to sleep mode, charging
may take longer.
◎
To enable sleep mode to be switched to automatically during
charging, tap
on the home screen → [Settings] →
[Developer options]
→
[Stay awake], and then clear the check box.