ATX ChromaFlex Скачать руководство пользователя страница 34

Страница: 34 / 90

CRAFT LINE INTERFACE (CLI)

4-6

ChromaFlex Chassis – Operation Manual

ATX Confidential & Proprietary

Example #1: In this example, the user “inno” with password “inno” initiated the download request. The download file name

is “vmlinux-initrd.img” which is hosted under /tftpboot on the download server at 192.168.1.137. Note: the ftp server must be

set up prior to a successful download. There is no response returned for this command. To see the download status, user

shall use “downloadstatus” command instead.

ChromaFlex [slot-1] >download inno inno 192.168.1.137 /tftpboot/vmlinux-initrd.img

Reboot:

displays the current reboot state or initiates a system reboot.

Example #1: This example demonstrates a controller module reboot. The reboot process may take a few

minutes to complete.

ChromaFlex [slot-1] >reboot now

Date:

displays the current UTC date and time. Note: The ChromaFlex chassis is configured to the factory time prior to

shipment. It does not make a local time adjustment (e.g. daylight saving time) automatically.

Hostname:

displays or configure the system hostname.

Example #1: In this example, the user requested to configure the hostname “InnoTrans”. And the

controller module indicates the command execution as “Successful”.

ChromaFlex[slot-1]

>hostname

InnoTrans

Successful

Community:

displays or configures the SNMP community string. Up to 3 community strings are supported. The system

default community string is “public” with read only permission.

Example #1: In this example, the user requested to add a community string “inno” with read-write

permission. And the controller module indicates the command execution as “Successful”.

ChromaFlex [slot-1] >community add inno rw

Successful

Example #2: In this example, the user requested to add a community string name “inno” with read-only

permission. And the controller module indicates the command execution as “Successful”

ChromaFlex [slot-1] >community add inno

Successful

TrapAddr:

displays or configures the SNMP trap destination IP addresses. Up to 2 trap addresses are supported.

Example #1: In this example, the user requested to add a trap destination, 192.168.1.137. And the

controller module indicates the command execution as “Successful”.

ChromaFlex [slot-1] >trapaddr add 192.168.1.137

Successful

sysContact:

displays or configures the SNMP system contact information.

CHAPTER 4:

Содержание ChromaFlex



























































































Результаты поиска

Содержание ChromaFlex

Отзывы:

Бренды по названию

Популярные бренды

ATX ChromaFlex, Руководство по эксплуатации

Результаты поиска

Содержание ChromaFlex

Отзывы:

Бренды по названию

Популярные бренды