ATX ChromaFlex Скачать руководство пользователя страница 13

Страница: 13 / 90

HAND-HELD DISPLAY MODULE

ChromaFlex Chassis – Operation Manual

3-3

ATX Confidential & Proprietary

Example #1: User is within the “Status Menu” of slot #1, press and hold the Up and Down buttons, the front panel displays

“Current Slot: 1”. The “Status Menu” returns after releasing the Up and Down button combinations.

LEFT+RIGHT

: When pressing and holding the LEFT+RIGHT button simultaneously, the front panel will display the tree’s top

menu of the current sub-tree. The top menu is usually the module’s Greetings.

3.3 Display Module LCD Display

This section describes the Display Modules LCD display menu tree structure and specific menus associated with the

ChromaFlex chassis and ChromaFlex plug-in application modules.

The Display Modules LCD menu for the ChromaFlex chassis is structured into tri-level tree. The top level (Level 1) is the

system Greeting. Level 2 is where you select either the Chassis related information or a slot and Level 3 displays the

selected system level information for the chassis or greeting menu of the selected slot.

3.3.1 Chassis System Menu Trees

The ChromaFlex chassis LCD menu is structured into bi-level trees. The top level is system related information and the

second level is plug-in related information. The top level contains the menu for second level, but each has its own menu

structure.

Level 1

Level 2

Level 3

Greeting

Slot

Status

Voltage (V)

Chassis

Mod Temp

Model

Hardware Version

Software Version

Serial Number

Prev Menu

Alarm

Power Supply

Fan

Prev Menu

Table 1: ChromaFlex System Menu Overview

The Display Module displays the greeting message when connected to the controller module and the initial reset has

completed.

Greeting:

Press the “Select” button to go into the system menus. The entries in system menus are described as follows:

Numbered Slot:

This displays the detected plug-in card type or “Empty” if none is detected. Press “Right” or “Left” button to cycle through

available slots. Press “Select” to select an individual slot (module) menu. If the communication with slot establishes

successfully, the display will go into the Module Greeting menu. Keep in mind that the slot numbering scheme is from 1 to 8.

ATX Networks

ChromaFlex

CHAPTER 3:

Содержание ChromaFlex



























































































Результаты поиска

Содержание ChromaFlex

Отзывы:

Похожие инструкции для ChromaFlex

Бренды по названию

Популярные бренды

ATX ChromaFlex, Руководство по эксплуатации

Результаты поиска

Содержание ChromaFlex

Отзывы:

Похожие инструкции для ChromaFlex

Бренды по названию

Популярные бренды