ATX ChromaFlex Скачать руководство пользователя страница 21

Страница: 21 / 90

HAND-HELD DISPLAY MODULE

ChromaFlex Chassis – Operation Manual

3-11

ATX Confi dential & Proprietary

Setup Menu:
Mode Setting
This menu only appears on AGC-EFDA and VG-EDFA module

Mode:

Read only, display the reading of mode setting.

Save

: use the right or left bottom to toggle the NVRAM mode to “Yes” to save and press select to store the setting

in the NV RAM.

NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.

Gain Setting
This menu only appears on AGC-EFDA and VG-EDFA module

RF Lvl(rdB):

current RF level reading in rdB (relative dB).

Gain:

Read only, display of gain reading in dB.

Save

: use the right or left bottom to toggle the NVRAM mode to “Yes” to save and press select to store the setting

in the NV RAM.

NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.

OPTOut Settings
This menu only appears on VG-EDFA module

OPTOut (dBm):

displays the readback of optical output power in dBm. This information is displayed to aide user

while adjusting the output power.

OPTOut(dBm):

adjustment of output power level. Use the right or left to toggle through available options.

Save

: use the right or left bottom to toggle the NVRAM mode to “Yes” to save and press select to store the setting

in the NV RAM.

NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.

Status Menu:

OPT Input (dBm)

: displays the reading of optical input power in dBm.

OPT Output (dBm)

: displays the reading of optical output power in dBm.

Gain (dB)

: display the delta between the optical input and output power in dB.

Voltage (V)

: displayed the on board supply voltage.

Alarm Menu:

OPT Input

: displays the alarm status of the optical input power.

OPT Output

: displays the alarm status of the optical output power in EDFA, or display the alarm status the gain in

AGC-EDFA type.

Module Temp:

displays the alarm status of module temperature.

Chassis Menu:
Temp(C):

displays the module’s temperature reading in Centigrade.

Model

: displays the model name of plug-in module.

HW Ver

: displays the hardware version information of plug-in module.

SW Ver

: displays the software version information of plug-in module.

Ser #

: displays the serial number of plug-in module.

Prev Menu:

Press “Select” will bring the plug-in’s greeting message screen back.

CHAPTER 3:

Содержание ChromaFlex



























































































Результаты поиска

Содержание ChromaFlex

Отзывы:

Бренды по названию

Популярные бренды

ATX ChromaFlex, Руководство по эксплуатации

Результаты поиска

Содержание ChromaFlex

Отзывы:

Бренды по названию

Популярные бренды