manualshive.com logo in svg

ATTACK ATTACK DPX 25 COMBI Pellet, Инструкция по эксплуатации

Поделиться
Скачать
ATTACK ATTACK DPX 25 COMBI Pellet Скачать руководство пользователя страница 61

 

60 

EN 

11

 

TRANSPORT, HANDLING AND STORING 

In production is the boiler laid on a pallet and fixed by technological screws. It is packed in 
a paper box, tied up by a tape and wrapped in stretch foil. 
Transport, handling and storing of the packed product is allowed only on this pallet. 
There are the hanging eyes placed under the upper cover to enable handling with a crane. 
Only an approved person can ensure handling with this product. 
 

11.1

 

INSTRUCTIONS FOR PRODUCT DISPOSAL AFTER TERMINATION 

OF ITS SERVICE LIFE 

Ensure the disposal of the appliance (boiler) by the waste disposal service, eventually use the 
regulated waste dump, controlled by the municipal authority. 
 

11.2

 

DISPOSAL OF THE PACKAGING 

Dispose the packaging by the waste disposal service, eventually use the regulated waste dump. 
 

11.3

 

ACCESSORIES 

The ATTACK DPX boiler is delivered functionally tested, packed and laid on a wood pallet. It is 
delivered with the instruction manual. 
 

The following accessories are included in the delivery: 

•

 

Instruction manual 

•

 

Warranty certificate 

•

 

List of contractual service organizations 

 

Содержание ATTACK DPX 25 COMBI Pellet





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды