3
Safety regulations
When working with systems comply with legal ac-
cident prevention regulations according to BGG
945, inspection of lifts; BGR 500 and operation of
systems; VBG 14.
Particular attention is drawn to compliance with the
following regulations:
)
When operating the system, follow safety regula-
tions and operating instructions in the operating
manual.
)
The total weight of the accepted load may not
exceed 3,200 kg,
)
Only personnel aged 18 or over may operate
systems independently, they must be trained in
!y!tem operation and have their ;ork verified by
the company. They must be explicitly tasked with
operating the !y!tem
(e’cerpt
from *GR 500), !ee
transfer protocol.
)
During lifting or lowering, the work area of the sys-
tem should be clear or people.
)
It is prohibited from moving people with the lift.
)
It is prohibited to climb onto the system.
)
The lift must be completely lowered before the
vehicle is driven on, and it may only be done in
the intended direction.
)
For vehicle! ;ith lo; floor clearance or cu!tom
equipment, check before driving, whether it
could be damaged.
)
The !et up of !tandard lift! i! not permitted in fire
and explosion endangered work shops.
)
Caution when leaving car engines running in en-
closed spaces: danger of poisoning.
)
When removing heavy vehicle part! (e.g. motor!)
the centre of mass of the vehicle changes. In this
case secure the vehicle against falling using suit-
able means.
)
Initial access into the lift may only be done after
the main switch is off and locked.
)
Secure the lift against unauthorized use by switch-
ing off the main switch and by using a padlock.
)
Always keep the lift and work space clean and
dry.
3.1
Safety inspection
The safety inspection is required to guarantee op-
erational safety of the lift system. It is to be done:
1.
before fir!t commi!!ioning after !etting up the lift
system
use the "single safety inspection" form
2.
After fir!t commi!!ioning, check regularly at
least once per year.
Use the "regular safety inspection" form
3.
After changes to the lift system construction
Use the "extraordinary safety inspection" form
!
Single and regular safety inspections must be
done by a specialist. It is recommended to do
maintenance at the same time.
i
After a change in construction (for example
changing the load carrying capacity or chang-
ing the lifting height" and after significant main-
tenance on load carrying parts (e.g. welding
work), inspection by a technical expert is re-
quired (extraordinary safety inspection)
This inspection book contains forms with a detailed
inspection plan for safety inspections. Please use
the appropriate form, record the condition of the
inspected system and leave the completed form in
this inspection book.
AD H9402
19.05.2015
JUMBO LIFT 3200 NT - HYMAX XX 3200 PH
53
