1
Introduction
Nußbaum products are a result of many years of ex-
perience. A high quality standard and superior con-
cept guarantees you reliability, long lifetimes and
economical operation. To prevent unnecessary
damage and hazards, read this operating manual
carefully and always comply with its contents.
!
Any other use, or use beyond purpose is consid-
ered improper.
!
Otto Nußbaum GmbH & Co.KG is not liable for
any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
)
Adherence to all instructions in this operating
manual and
)
Compliance with inspection and maintenance
work and the inspections stipulated.
)
The operating manual is to be followed by all per-
sonnel working on the system. This is notably with
regards to Section 3 "Safety conditions"
)
In addition to safety information from the operat-
ing manual, comply with rules and regulations at
the location of use.
)
Proper system handling
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
)
Understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the system.
)
Have read the safety section and warning infor-
mation in this operating manual, have under-
!tood it and confirmed learning ;ith a !ignature.
Hazards in working with the system:
Nußbaum products have been designed and built
to state-of-the-art and to recognized safety stan-
dards. However, improper use may lead to hazards
to life and limb of the user or result in property dam-
age.
The system may only be operated
)
For proper intended use
)
If it is technically in perfect condition
Organizational measures
)
The operating manual is always to be kept ready
at the location of use of the system.
)
Supplemental to the operating manual, refer to
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
)
Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
)
Use personal protective equipment as needed or
required by regulations.
)
All safety and hazard information on the system is
to be kept in a legible condition!
)
Replacement part! mu!t meet technical !pecifi-
cations of the manufacturer. This is only guaran-
teed for original parts.
)
Deadlines pre-set or given in the operating man-
ual for repeating tests / inspections must be fol-
lowed.
Maintenance work, error removal
)
Comply with pre-determined setting, mainte-
nance and inspection work and intervals in the
operating manual, including details for exchang-
ing part!
”
part fitting!! The!e activitie! may only
be done by specialists who have participated in
a special factory training.
50
JUMBO LIFT 3200 NT - HYMAX XX 3200 PH
19.05.2015
AD H9402
