ATS PAV3, Инструкция по эксплуатации, Страница: 22 / 55

22
Select “Done” to return to the “Preheat Startup” c.
screen.
To change the soak time, select Settings from the d.
Information screen. The soak time can be set at
any time from 5-20 minutes.
If using preheated samples, the soak i.
time can be reduced to five minutes.If
the samples are at room temperature,
select 20 minutes for the soak time.
This will preheat the samples to the age
temperature prior to aging.
The heaters on the PAV can be set to automatically e.
shut off once a test is completed. Select “On” for
this option. Selecting “Off” will cause the heaters
to continue running after a test is complete.