Atrie DB108Ethernet User Manual
Page 7 Total 17 Pages
3.3.2
SAVE SETTING
After getting through each page for parameters setting, click “Save” or “Save apply” to store the value in
ADSL MODEM. Briefly, we named “Save”.
Note
：
When you save the settings, the web page will be refreshed slowly, please wait it finished.
After you save the settings, it will take effect until next reboot.
Some settings only take effect after rebooting the router.
3.4 WAN CONFIGURATION
If the configuration is bridge encapsulation, there is no need to configure any more parameters. Only need
to use the third party dial-up software to connect the Internet.
Totally, this router supports
：
PPPoA
、
PPPoE
、
MER
、
IpoA
、
Bridging. For detail configuration information,
please check the following configuration guide.
3.4.1 CONFIGURATION GUIDE
Click “WAN” on the left page, enter into “WAN” configuration page.
z
Note: At most we can have four connections. If you need to add a new connection, please delete or modify
an existing connection.
Figure 3.2
