Atrie DB108Ethernet User Manual
Page 5 Total 17 Pages
Introduction
：
1
、
U
se a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2
、
Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL
Modem.
3
、
Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4
、
Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the
network cable that comes with the modem.
5
、
Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just connect the
LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this
case, the splitter is not necessary.
2.3 LED STATUS INDICATION
Table 2.3
Status
POWER (red)
LINK (yellow)
DATA (green)
PC(green)
Steady light
Power on
The modem is in good
connection
Connected with PC
Ethernet line is connected
Flashing
/
In handshaking status
/
/
Fast flashing
/
/
Transmitting
or
receiving data
Transforming data
Off
Power off
Connection not set up
Not connected with PC
properly
Ethernet line not
connected properly
