Atrie DB108Ethernet User Manual
Page 4 Total 17 Pages
2 SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1
I
NDICATOR AND INTERFACE
Table 2.1
ITEM
Name
State introduction
POWER
A steady red light means the power connection works properly
LINK
Yellow, shows DSL line status.
DATA
Green, Flashing means the Modem is transmitting or receiving
data
Indicator
PC
Green, Indicates status of connection to the PC network card
LINE
Connected with phone line or “ADSL” port of the splitter.
ETHERNET
To be connected to a PC network card by a straight-through
network cable, also can use a crossover cable to connect to Hub,
Switch or Router.
POWER Power
interface,
Connect with power adapter.
RST
Reset to default setting.
Put a pin into the eyelet, and press the button hidden in the
modem, then you can reset the modem with the default value.
Interface
SWITCH
To turn on / off the power.
2.1.2 SPLITTER SPEC
Table 2.2
Interface
Introduction
LINE
Connected with telephone line
ADSL
Connect with the LINE port of the
ADSL Modem using telephone
line provided.
PHONE Connect
with
telephone
2.2 HARDWARE CONNECTION
Figure 2.1
