Atrie DB108Ethernet User Manual
Page 16 Total 17 Pages
subsequently popped up is the command line window.
Note 3
：
The returned values of ping command in the following format show the standard of “reachable”
Figure 5.1
If ping of the modem is reachable but ping of the outer fixed IP is unreachable, attention should be
concentrated upon device settings. Please enter the configuring interface following the instructions in this
manual.
（
1
）
Check first the number of connections. If more than one connection exists, for troubleshooting ,
delete unused connections and remain the one connection you are using.
（
2
）
Check the connection to see whether correct “type” is selected. It’s normal to choose login type of
PPPoE. When you use PPPoE to login, the following information should be provided: VPI and
VCI, which can be queried from your ISP, user name and password.
（
3
）
Then make sure that “using NAT” and “default gateway” have been selected with a tick. Check
whether “connect on demand” has been selected with a tick. If it is selected, the connection is
activated only when traffic to outer networks arrives. If not selected, check “keep connection”,
which should be set to 0 if you demand to keep connection
Make sure that the above parameters are saved after configuration. Internet is now available since the
configuration is properly done.
ANNEX
：
SHIPPING LIST
ADSL MODEM
×
1
Splitter
×
1
User Manual
×
1
Power Supply
×
1
Cable Cat5 RJ45
×
1
Telephone Line
×
2
Atrie Technology Pvt. Ltd.
Corporate office
: Atrie House, # 591,3
rd
Block, Koramangala, Bangalore -560 034 India
Registered office:
#B-121,Ground Floor ,Kalkaji, New Delhi – 110019
Regional office (West):
#C/312,3rd Floor, Gokul Arcade, Vile Parle(E) Subhash Road,Mumbai - 400057
Web:
http://www.atrieindia.com
Email:
