Atrie DB108Ethernet User Manual
Page 6 Total 17 Pages
3.CONFIGURATION
3.1 DEFAULT CONFIGURATION
ADSL MODEM has pre-configured with the following VCI/VPI. The default dial-up mode is bridge
encapsulation. For bridge mode, no need to configure any more parameter. However, the third party dial-up
software is needed for connection with the Internet
Tabel 3.1
Link Name
VPI
VCI
pvc_0_32 32 0
pvc_8_35 35 8
pvc_0_35 35 0
pvc_8_81 81 8
3.2 COMPUTER CONFIGURATION
The default IP address for ADSL MODEM is:
192.168.1.1
; The Subnet Mask is
：
255.255.255.0
. Users can
configure ADSL MODEM through an Internet browser. ADSL MODEM can be used as gateway and DNS
server; users need to set the computer’s TCP/IP protocol as follow:
1
、
Set the computer IP address at same segment of ADSL MODEM, such as set the IP address of the
network card to one of the “192.168.1.2”
～
“192.168.1.254”.
2
、
Set the computer’s gateway the same IP address as the ADSL Modem’s.
3
、
Set computer’s DNS server the same as ADSL Modem’s IP address or that of an effective DNS server.
3.3 ADSL MODEM CONFIGURATION
3.3.1 LOG IN
Open the browser; input
http://192.168.1.1
at the address column. Press “Enter” key then the entry dialog
box will show up as Figure 3.1. Input “username” and “password” (capital sensitive), then press Enter.
Figure 3.1
